BGMQG - ABLEFILM 501
- MSDS: BGMQG
- Manufacturer: ABLESTIK LABORATORIES
- Product Name: ABLEFILM 501
- National Stock Number: 8040-01-119-7607
Product Identification
Product ID:ABLEFILM 501
MSDS Date:01/01/1987
FSC:8040
NIIN:01-119-7607
MSDS Number: BGMQG
Responsible Party
Emergency Phone: 213-532-9341
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
NON-HAZARDOUS INGREDIENTS.
Hazards
Effects of Overexposure:EYES/SKIN: MAY IRRITATE OR CAUSE
IRRITATION/SENSITIZATION.; INHAL: IRRITATES WHEN HEATED TO HI-TMP
First Aid
First Aid:EYES:FLUSH W/WATER FOR @ LEAST 15MIN.-GET MED. ATTN; SKIN:
WASH IMMED. W/SOAP & WATER. IF IRRITATION PERSISTS,SEEK MED. ATTN.;
INHAL: REMOVE TO FRESH AIR IMMEDIATELY. GIVE 0*2/CPR AS SITUATION
DICTATE S; INGEST: SEEK IMMED. MED. ATTN.
Fire Fighting
Flash Point:>300F/>148C PMCC
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA' WHEN FIGHTING CHEMICAL TYPE FIRES
Unusual Fire/Explosion Hazard:NONE KNOWN TO MFR.
Accidental Release
Spill Release Procedures:SWEEP UP & COLLECT IN AN APPROPRIATE CONTAINER
FOR DISPOSAL.
Handling
Handling and Storage Precautions:STORE FROZEN AT -40F. VENT CURING
OVEN TO OUTDOORS. AVOID CONTACT W/SKIN, EYES, & CLOTHING. USE GOOD
INDUSTR. HYG. PRACTICE. AVOID INHALING VAPORS.
Exposure Controls
Respiratory Protection:NIOSH APPRVD ORGANIC VAPOR RESP. IF NEEDED.
Ventilation:MECHANICAL (GENERAL) ACCEPTABLE LOCAL EXHAUST IF NEEDED.
Protective Gloves:RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT PROLONGED CONTACT.
Supplemental Safety and Health
MSDS DATE:8/19/86
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>400F/>204C
Spec Gravity:1.2
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR AMBER DRY FILM; ODORLESS
Percent Volatiles by Volume:<1.3
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALKALIES, & STRONG ACIDS.
Stability Condition to Avoid:NONE-KNOWN TO MFR.
Hazardous Decomposition Products:CARBON MONOXIDE & ALDEHYDES, ACIDS, &
CARBON DIOXIDE
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE.
Disposal
Waste Disposal Methods:DISPOSE IN AN APPROVED CHEMICAL DISPOSAL AREA OR
IN A MANNER WHICH COMPLIES W/ALL LOCAL, STATE, & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.